RhinoROC® Bare

RhinoROC® bare finish raised access flooring panels are manufactured from cold rolled steel resistance welded, light weight cement-filled steel panels are specifically designed to accommodate dynamic loads and to withstand some of the highest ultimate loads in the industry. The design incorporates a classic 64 domes bottom shell with cross-beams and 4-ribbed beams strengthen center and perimeter of the panel, total 140 resistance welds dramatically improved edge load capacities, and overall panel durability.

	ROC100	ROC200	ROC300	ROC400	ROC500	ROC600
Panel Size	600 × 600 mm	600 × 600 mm	600 × 600 mm	600 × 600 mm	600 × 600 mm	600 × 600 mm
Panel Thickness	33.50 mm	33.50 mm	34.00 mm	34.00 mm	34.00 mm	34.00 mm
Panel Weight	13.00 kg	14.00 kg	15.00 kg	16.00 kg	17.00 kg	18.00 kg
System Weight	42.00 kg	45.00 kg	48.00 kg	51.00 kg	54.00 kg	56.00 kg
Concentrated Load	3.56 kN	4.45 kN	5.56 kN	6.67 kN	8.90 kN	11.12 kN
Uniform Load	14.00 kN	17.00 kN	19.00 kN	22.00 kN	26.00 kN	31.00 kN
Ultimate Load	10.68 kN	13.34 kN	16.68 kN	20.02 kN	26.70 kN	33.36 kN

Tested & Certified Standards

Static load performance is tested according to CISCA 2007, EN 12825 and PSA MOB PF2 PS/SPU
Fire performance 2 hours fire rating is tested according to ASTM E119
Fire performance 1 hour fire rating is tested according to EN 1366-6 (EN 13501-2)
Corrosion protection 72 hours is tested according to ISO 9227 Neutral Salt Spray (NSS)
Surface burning characteristics Class 1 or Class A is tested according to ASTM E84
Non-combustible is tested according to ASTM E136
Low VOC is tested according to ASTM D5116

Features

Accommodates maximum dynamic loads to 33kN
Interchangeable with other Roc panels
Quiet, with a solid feel underfoot
Powder-coated, protective epoxy finish