Home / Products / RhinoEU® Covered

RhinoEU® Covered

RhinoEU® Covered raised access floor panels are manufactured from a high density of calcium sulphate (approx. 1,650 kg/m³) non-toxic and non-combustible material. The top surface of the core is laminated with Anti-static High Pressure Laminate (HPL) or Conductive Vinyl (PVC) tiles and the base surface is laminated with galvanized steel sheet. The panel edges are then laminated with an ABS/PVC edge band which provides protection to the calcium sulphate core.

	EU800C	EU1000C	EU1250C	EU1500C
Panel Size	600 × 600 mm	600 × 600 mm	600 × 600 mm	600 × 600 mm
Panel Thickness	32.00 mm	33.00 mm	36.00 mm	40.00 mm
Panel Weight	18.00 kg	19.00 kg	21.00 kg	23.00 kg
System Weight	57.00 kg	59.00 kg	63.00 kg	69.00 kg
Concentrated Load	3.00 kN	4.50 kN	5.56 kN	6.67 kN
Uniform Load	8.00 kN	12.00 kN	16.00 kN	20.00 kN
Ultimate Load	9.00 kN	13.50 kN	16.68 kN	20.01 kN

Tested & Certified Standards

This rigid grid system is tested in accordance with PSA MOB PS/SPU specification
Panel deflection at centre edge must not exceed 2.5 mm
Performance to a safety factor of 3 x static load
Structural performance based upon a full Rhino access floors system i.e. panels & pedestals

Features

Non-toxic
Non-combustible
Impressive acoustic performance
Superb underfoot comfort

Download Brochures

RhinoEU® Covered Datasheet

Reinforced Profile Stringer Type RL

System Floor Pedestal Type M3

System Floor Pedestal Type M4

System Floor Pedestal Type M5

RhinoCS® Covered Datasheet

RhinoCS® Substructure Datasheet