Home / Products / RhinoEU® Bare

RhinoEU® Bare

RhinoEU® Bare finish raised floor panels are manufactured from a high density of calcium sulphate (approx. 1,650 kg/m³) non-toxic and non-combustible material. The top and base surfaces of the core are laminated with galvanized steel sheet. The panel edges are then laminated with an ABS/PVC edge band which provides protection to the calcium sulphate core.

	EU800	EU1000	EU1250	EU1500
Panel Size	600 × 600 mm	600 × 600 mm	600 × 600 mm	600 × 600 mm
Panel Thickness	31.00 mm	32.00 mm	35.00 mm	39.00 mm
Panel Weight	17.50 kg	18.00 kg	18.50 kg	19.00 kg
System Weight	56.00 kg	58.00 kg	62.00 kg	68.00 kg
Concentrated Load	3.00 kN	4.50 kN	5.56 kN	6.67 kN
Uniform Load	8.00 kN	12.00 kN	16.00 kN	20.00 kN
Ultimate Load	9.00 kN	13.50 kN	16.68 kN	20.01 kN

Tested & Certified Standards

This rigid grid system is tested in accordance with PSA MOB PS/SPU specification
Panel deflection at centre edge must not exceed 2.5 mm
Performance to a safety factor of 3 x static load
Structural performance based upon a full Rhino access floors system i.e. panels & pedestals

Features

Non-toxic
Non-combustible
Impressive acoustic performance
Superb underfoot comfort
High load capacity

Download Brochures

RhinoEU® Bare Datasheet

Reinforced Profile Stringer Type RL

System Floor Pedestal Type M3

System Floor Pedestal Type M5

System Floor Pedestal Type M4

RhinoCS® Bare Datasheet

RhinoCS® Substructure Datasheet